drilling machine
manual DIY drilling machine
- small type DIY drilling machine
- max 60m
- could not used in stone area
- Product description: small type DIY manual drilling well machine, cheap type
The small electric well drilling rig is a drilling tool specially designed and manufactured by our factory for drilling small diameter deep wells in rural and urban areas. The rotor and stator are made of special insulating materials, which will not load heat and leak electricity. The speed of the drilling rig is 80 revolutions, 100 revolutions, 150 revolutions, 0-150 revolutions, 0-260 revolutions/min, 0-300 revolutions/min, 0-500 revolutions/min. . Power: 1050 watts, 1500 watts, 1600 watts, 2000 watts, 4000 watts. It can be reversible, can be sucked in and turned out, it adopts high-quality sealing material, and it does not leak water and air. The motor and the water inlet device are separated from water and electricity, and the motor will not enter water, which is safer. The rotor and stator gears are of good quality and low noise. Maintenance is simple and convenient. Drilling a well saves time and effort and reduces work intensity. The borehole diameter can be 4-180MM, and the deepest is 100 meters. The drilling rig adopts gear speed regulation, non-switch speed regulation, greater power, light weight, and easy to carry. It is widely used in water air conditioning, solar installation, domestic water, light engineering dewatering wells, and trenchless laying of water pipes, cables, and foundation pits. Construction of horizontal drilling for slope protection.
The size and depth of the wellbore of the portable drilling rig:
A borehole with a diameter of less than 100 mm is about 0-60 meters
A borehole with a diameter of 100-120 mm is about 0-40 meters
A borehole with a diameter of 120-160 mm is about 0-30 meters (the bigger the borehole is, the deeper it will not be. When drilling a large borehole, use a 2200 watt large-flow high-lift submersible pump to flush water)
